Type: E6A2-CS5C 500P/R 0.5M

Categorise	Incremental Shaft model
Diameter	25 dia.
Power supply voltage	DC12-10% to 24+15% V (ripple (p-p): 5% max.)
Current consumption	20 mA DC max.
Resolution	500 P/R
Inrush current	Approx. 9 A (Time: Approx. 0.3 ms)
Output phases	A
Control output (Output type)	NPN open collector
Control output (Load power supply voltage)	30 VDC max.
Control output (Load current)	30 mA max. (Sink current)
Control output (Residual voltage)	0.4 VDC max. (at sink current 30 mA)
Max. response frequency	30 kHz
Output duty factor	50±25%
Rise and fall times of output	1 µs max. (Cable length: 0.5 m, output voltage: 5 V, load resistance: 1 kΩ )
Starting torque	1 mN.m max.
Moment of inertia	1 x 10**-7 kg.m**2 max.
Shaft loading	Radial: 10 N Thrust: 5 N
Max. permissible rotation	5000 r/min
Ambient temperature	Operating: -10 to 55 ℃ Storage: -25 to 80 ℃ (with no icing)
Ambient humidity	Operating: 35 to 85% RH Storage: 35 to 85% RH (with no condensation)
Insulation resistance	Between charged parts and the case: 20 MΩ min. at 500 VDC
Dielectric strength	Between charged parts and the case: 500 VAC at 50/60 Hz for 1 min
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance	500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC: IP50
Connection method	Pre-wired models (Cable_length: 0.5 m)
Material (body)	Aluminum
Material (case)	Aluminum alloy
Material (shaft)	SUS420J2
Material (mounting bracket)	Iron zinc plating
Weight (packed state)	Approx. 35 g
Accessories	Instruction manual, coupling and hex-head spanner