E6B2-CWZ5B 360P/R 0.5M
Type: E6B2-CWZ5B 360P/R 0.5M
Categorise
Incremental
Shaft model
Diameter
40 dia.
Power supply voltage
DC12-10% to 24+15% V (ripple (p-p): 5% max.)
Current consumption
100 mA DC max.
Resolution
360 P/R
Inrush current
Approx. 9 A (Time: Approx. 0.3 ms)
Output phases
A, B and Z
Control output (Output type)
PNP open collector
Control output (Load power supply voltage)
30 VDC max.
Control output (Load current)
35 mA max. (source current)
Control output (Residual voltage)
0.4 VDC max. (at source current 35 mA)
Starting positional point
Equipped
Max. response frequency
50 kHz
Phase difference on output
90±45°between A and B (1/4 T ± 1/8 T)
Starting torque
0.98 mN.m max.
Moment of inertia
3 x 10**-7 kg.m**2 max.
Shaft loading
Radial: 30 N
Thrust: 20 N
Max. permissible rotation
6000 r/min
Protective circuit
Output short cut protection
Power supply reverce polarity protection
Ambient temperature
Operating: -10 to 70 ℃
Storage: -25 to 85 ℃
(with no icing)
Ambient humidity
Operating: 35 to 85% RH
Storage: 35 to 85% RH
(with no condensation)
Insulation resistance
Between charged parts and the case: 20 MΩ min. at 500 VDC
Dielectric strength
Between charged parts and the case: 500 VAC at 50/60 Hz for 1 min
Vibration resistance
10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions
Shock resistance
1000 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection
IEC: IP50
Connection method
Pre-wired models (Cable_length: 0.5 m)
Material (body)
Aluminum
Material (case)
ABS
Material (shaft)
SUS420J2
Weight (packed state)
Approx. 100 g
Accessories
Instruction manual, coupling and hex-head spanner
| Categorise | Incremental Shaft model |
|---|---|
| Diameter | 40 dia. |
| Power supply voltage | DC12-10% to 24+15% V (ripple (p-p): 5% max.) |
| Current consumption | 100 mA DC max. |
| Resolution | 360 P/R |
| Inrush current | Approx. 9 A (Time: Approx. 0.3 ms) |
| Output phases | A, B and Z |
| Control output (Output type) | PNP open collector |
| Control output (Load power supply voltage) | 30 VDC max. |
| Control output (Load current) | 35 mA max. (source current) |
| Control output (Residual voltage) | 0.4 VDC max. (at source current 35 mA) |
| Starting positional point | Equipped |
| Max. response frequency | 50 kHz |
| Phase difference on output | 90±45°between A and B (1/4 T ± 1/8 T) |
| Starting torque | 0.98 mN.m max. |
| Moment of inertia | 3 x 10**-7 kg.m**2 max. |
| Shaft loading | Radial: 30 N Thrust: 20 N |
| Max. permissible rotation | 6000 r/min |
| Protective circuit | Output short cut protection Power supply reverce polarity protection |
| Ambient temperature | Operating: -10 to 70 ℃ Storage: -25 to 85 ℃ (with no icing) |
| Ambient humidity | Operating: 35 to 85% RH Storage: 35 to 85% RH (with no condensation) |
| Insulation resistance | Between charged parts and the case: 20 MΩ min. at 500 VDC |
| Dielectric strength | Between charged parts and the case: 500 VAC at 50/60 Hz for 1 min |
| Vibration resistance | 10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions |
| Shock resistance | 1000 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC: IP50 |
| Connection method | Pre-wired models (Cable_length: 0.5 m) |
| Material (body) | Aluminum |
| Material (case) | ABS |
| Material (shaft) | SUS420J2 |
| Weight (packed state) | Approx. 100 g |
| Accessories | Instruction manual, coupling and hex-head spanner |