E6B2-CWZ6C 360P/R 2M
Type: E6B2-CWZ6C 360P/R 2M
Categorise
Incremental
Shaft model
Diameter
40 dia.
Power supply voltage
DC5-5% to 24+15% V (ripple (p-p): 5% max.)
Current consumption
80 mA DC max.
Resolution
360 P/R
Inrush current
Approx. 9 A (Time: Approx. 0.3 ms)
Output phases
A, B and Z
Control output (Output type)
NPN open collector
Control output (Load power supply voltage)
30 VDC max.
Control output (Load current)
35 mA max. (Sink current)
Control output (Residual voltage)
0.4 VDC max. (at sink current 35 mA)
Starting positional point
Equipped
Max. response frequency
100 kHz
Phase difference on output
90±45°between A and B (1/4 T ± 1/8 T)
Rise and fall times of output
1 µs max. (Cable length: 2 m, output voltage: 5 V, load resistance: 1 kΩ )
Starting torque
0.98 mN.m max.
Moment of inertia
3 x 10**-7 kg.m**2 max.
Shaft loading
Radial: 30 N
Thrust: 20 N
Max. permissible rotation
6000 r/min
Protective circuit
Output short cut protection
Power supply reverce polarity protection
Ambient temperature
Operating: -10 to 70 ℃
Storage: -25 to 85 ℃
(with no icing)
Ambient humidity
Operating: 35 to 85% RH
Storage: 35 to 85% RH
(with no condensation)
Insulation resistance
Between charged parts and the case: 20 MΩ min. at 500 VDC
Dielectric strength
Between charged parts and the case: 500 VAC at 50/60 Hz for 1 min
Vibration resistance
10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions
Shock resistance
1000 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection
IEC: IP50
Connection method
Pre-wired models (Cable_length: 2 m)
Material (body)
Aluminum
Material (case)
ABS
Material (shaft)
SUS420J2
Accessories
Instruction manual, coupling and hex-head spanner
| Categorise | Incremental Shaft model |
|---|---|
| Diameter | 40 dia. |
| Power supply voltage | DC5-5% to 24+15% V (ripple (p-p): 5% max.) |
| Current consumption | 80 mA DC max. |
| Resolution | 360 P/R |
| Inrush current | Approx. 9 A (Time: Approx. 0.3 ms) |
| Output phases | A, B and Z |
| Control output (Output type) | NPN open collector |
| Control output (Load power supply voltage) | 30 VDC max. |
| Control output (Load current) | 35 mA max. (Sink current) |
| Control output (Residual voltage) | 0.4 VDC max. (at sink current 35 mA) |
| Starting positional point | Equipped |
| Max. response frequency | 100 kHz |
| Phase difference on output | 90±45°between A and B (1/4 T ± 1/8 T) |
| Rise and fall times of output | 1 µs max. (Cable length: 2 m, output voltage: 5 V, load resistance: 1 kΩ ) |
| Starting torque | 0.98 mN.m max. |
| Moment of inertia | 3 x 10**-7 kg.m**2 max. |
| Shaft loading | Radial: 30 N Thrust: 20 N |
| Max. permissible rotation | 6000 r/min |
| Protective circuit | Output short cut protection Power supply reverce polarity protection |
| Ambient temperature | Operating: -10 to 70 ℃ Storage: -25 to 85 ℃ (with no icing) |
| Ambient humidity | Operating: 35 to 85% RH Storage: 35 to 85% RH (with no condensation) |
| Insulation resistance | Between charged parts and the case: 20 MΩ min. at 500 VDC |
| Dielectric strength | Between charged parts and the case: 500 VAC at 50/60 Hz for 1 min |
| Vibration resistance | 10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions |
| Shock resistance | 1000 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC: IP50 |
| Connection method | Pre-wired models (Cable_length: 2 m) |
| Material (body) | Aluminum |
| Material (case) | ABS |
| Material (shaft) | SUS420J2 |
| Accessories | Instruction manual, coupling and hex-head spanner |