E6C2-CWZ1X 600 P/R 2M
Type: E6C2-CWZ1X 600 P/R 2M
| Categorise | Incremental Shaft model |
|---|---|
| Diameter | 50 dia. |
| Power supply voltage | DC5-5% to 5+5% V (ripple (p-p): 5% max.) |
| Current consumption | 160 mA DC max. |
| Resolution | 600 P/R |
| Inrush current | Approx. 9 A (Time: Approx. 0.3 ms) |
| Output phases | A, -A, B, -B, Z and -Z |
| Control output (Output type) | Line driver output |
| Control output (Output voltage) | Vo: 2.5 V min. Vs: 0.5 V max |
| Control output (Load current) | High level (Io): -20 mA Low level (Is): 20 mA |
| Starting positional point | Equipped |
| Max. response frequency | 100 kHz |
| Phase difference on output | 90±45°between A and B (1/4 T ± 1/8 T) |
| Rise and fall times of output | 0.1 µs max. (Cable length: 2 m, Io: -20 mA Is: 20 mA) |
| Starting torque | 10 mN.m max. |
| Moment of inertia | 3 x 10**-7 kg.m**2 max. |
| Shaft loading | Radial: 50 N Thrust: 30 N |
| Max. permissible rotation | 6000 r/min |
| Ambient temperature | Operating: -10 to 70 ℃ Storage: -25 to 85 ℃ (with no icing) |
| Ambient humidity | Operating: 35 to 85% RH Storage: 35 to 85% RH (with no condensation) |
| Insulation resistance | Between charged parts and the case: 100 MΩ min. at 500 VDC |
| Dielectric strength | Between charged parts and the case: 500 VAC at 50/60 Hz for 1 min |
| Vibration resistance | 10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions |
| Shock resistance | 1000 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC: IP64 Company standard: Oil resistance |
| Connection method | Pre-wired models (Cable_length: 2 m) |
| Material (body) | Aluminum |
| Material (case) | Zinc alloy |
| Material (shaft) | SUS420J2 |
| Weight (packed state) | Approx. 400 g |
| Accessories | Instruction manual |