E6C2-CWZ5B 200P/R 2M
Type: E6C2-CWZ5B 200P/R 2M
| Categorise | Incremental Shaft model |
|---|---|
| Diameter | 50 dia. |
| Power supply voltage | DC12-10% to 24+15% V (ripple (p-p): 5% max.) |
| Current consumption | 100 mA DC max. |
| Resolution | 200 P/R |
| Inrush current | Approx. 9 A (Time: Approx. 0.3 ms) |
| Output phases | A, B and Z |
| Control output (Output type) | PNP open collector |
| Control output (Load power supply voltage) | 30 VDC max. |
| Control output (Load current) | 35 mA max. (source current) |
| Control output (Residual voltage) | 0.4 VDC max. (at source current 35 mA) |
| Starting positional point | Equipped |
| Max. response frequency | 50 kHz |
| Phase difference on output | 90±45°between A and B (1/4 T ± 1/8 T) |
| Rise and fall times of output | 1 µs max. (Cable length: 2 m, source current: 10 mA) |
| Starting torque | 10 mN.m max. |
| Moment of inertia | 3 x 10**-7 kg.m**2 max. |
| Shaft loading | Radial: 50 N Thrust: 30 N |
| Max. permissible rotation | 6000 r/min |
| Protective circuit | Output short cut protection Power supply reverce polarity protection |
| Ambient temperature | Operating: -10 to 70 ℃ Storage: -25 to 85 ℃ (with no icing) |
| Ambient humidity | Operating: 35 to 85% RH Storage: 35 to 85% RH (with no condensation) |
| Insulation resistance | Between charged parts and the case: 100 MΩ min. at 500 VDC |
| Dielectric strength | Between charged parts and the case: 500 VAC at 50/60 Hz for 1 min |
| Vibration resistance | 10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions |
| Shock resistance | 1000 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC: IP64 Company standard: Oil resistance |
| Connection method | Pre-wired models (Cable_length: 2 m) |
| Material (body) | Aluminum |
| Material (case) | Zinc alloy |
| Material (shaft) | SUS420J2 |
| Weight (packed state) | Approx. 400 g |
| Accessories | Instruction manual |