Categorise | Absolute Shaft model |
---|---|
Diameter | 50 dia. |
Power supply voltage | DC12-10% to 24+15% V (ripple (p-p): 5% max.) |
Current consumption | 70 mA DC max. |
Resolution | 1024 P/R |
Inrush current | Approx. 6 A (Time: Approx. 0.8 ms) |
Output code | Gray code |
Control output (Output type) | NPN open collector |
Control output (Load power supply voltage) | 30 VDC max. |
Control output (Load current) | 35 mA max. (Sink current) |
Control output (Residual voltage) | 0.4 VDC max. (at sink current 35 mA) |
Logic | Negative logic output |
Direction of rotation | Output code increases for CW (as viewed from end of shaft) |
Positioning signal | Not equipped |
Strobe signal | Not equipped |
Parity signal | Not equipped |
Max. response frequency | 20 kHz |
Rise and fall times of output | 1 µs max. (Cable length: 2 m, sink current: 35 mA) |
Starting torque | Room temperature: 10 mN.m max. Low temperature: 30 mN.m max. |
Moment of inertia | 2.3 x 10**-6 kg.m**2 max. |
Shaft loading | Radial: 80 N Thrust: 50 N |
Max. permissible rotation | 5000 r/min |
Ambient temperature | Operating: -10 to 70 ℃ Storage: -25 to 85 ℃ (with no icing) |
Ambient humidity | Operating: 35 to 85% RH Storage: 35 to 85% RH (with no condensation) |
Insulation resistance | Between charged parts and the case: 20 MΩ min. at 500 VDC |
Dielectric strength | Between charged parts and the case: 500 VAC at 50/60 Hz for 1 min |
Vibration resistance | 10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions |
Shock resistance | 1000 m/s**2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC: IP65 Company standard: Oil resistance |
Connection method | Pre-wired models (Cable_length: 2 m) |
Material (body) | Aluminum |
Material (case) | Aluminum |
Material (shaft) | SUS303 |
Accessories | Instruction manual |