H5AN-4D AC100-240
Type: H5AN-4D AC100-240
Rated supply voltage
100 to 240 VAC 50/60 Hz
Operating voltage range
85% to 110% of rated supply voltage
External power supply
80 mA, 12 VDC ±10% (5% ripple max.)
Power consumption
10VA (at 240 VAC)
Time ranges（Number of ranges）
8
Time ranges
0.01 s to 99.99 s / 0.1 s to 999.9 s / 1 s to 9999 s / 0.1 min to 999.9 min / 0.1 h to 999.9 h / 1 h to 9999 h
1sec～99min59sec
Select method
Rotary DIP switch
Input signals
Reset, Gate
Minimum input signal width
20 ms(Reset, Gate)
Output modes
N
F
C
R
K
P
Q
Control output （Contact output）
Type: SPDT
Switching capacities (Resistive load): 3 A at 250 VAC/3 A at 24 VDC
Minimum applicable load: 10 mA at 5 VDC (failure level: P Reference value)
Control output （Solid state output）
Transistor output (NPN open collector)
Switching capacities: 100 mA max. 30 VDC max.
One-shot output time
0.1 to 1 s (variable)
Reset system
Power reset / External reset / Manual reset / Automatic reset
Power reset
Minimum power-opening time: 0.5 s
Timer mode
Elapsed time (UP) and remaining time (DOWN) (selectable)
Display method
7-segment LED
Digit
4 digit
Character height
10 mm (Red)
Ambient temperature
Operating: -10 to 55 ℃
Storag: -25 to 65 ℃
Ambient humidity
Operating: 35 to 85%RH
Total accuracy
Accuracy of operating time setting error temperature influences and voltage influences (including the rise time of the power source and the operating times of the internal and output circuits).
Power-ON start: ±0.01% ±50 ms max.
The values are based on the set value.
Accuracy of operating time setting error temperature influences and voltage influences (including the rise time of the power source and the operating times of the internal and output circuits).
Reset start: ±0.005% ±30 ms max.
The values are based on the set value.
Insulation resistance
100 MΩ min. (at 500 VDC)
Between current carrying terminals and exposed non-current carrying metal parts / Between non-continuous contacts
Dielectric strength
Between current carrying terminals and exposed non-current carrying metal parts: 2000
Between non-continuous contacts: 750
Impulse withstand voltage
Between operating power supply terminals: 6 kV
Between current carrying terminals and exposed non-current carrying metal parts: 6 kV
Noise immunity
Between operating power supply terminals: ±2 kV
Between input terminals: ±500 V
Square-wave noise by noise simulator
Static immunity
Mulfunction: 8 kV
Vibration resistance （Destruction）
10 to 55 Hz, 0.375-mm single amplitude each in 3 directions for 2 h
Vibration resistance （Malfunction）
10 to 55 Hz, 0.25-mm single amplitude each in 3 directions for 10 min
Shock resistance （Destruction）
300 m/s**2, 3 times each in 6 directions
Shock resistance （Malfunction）
100 m/s**2, 4 times each in 6 directions
Mechanical life
10,000,000 operations min.
Electrical life
100,000 operations min. (3 A at 250 VAC resistive load)
Mounting method
Flush mounting
External connection method
Screw terminal
Case color
Light gray (Munsell 5Y7/1)
Attachment
Mounting bracket
Accessory (sold separately)
Y92H-5: Mounting bracket
Weight
約360g
| Rated supply voltage | 100 to 240 VAC 50/60 Hz |
|---|---|
| Operating voltage range | 85% to 110% of rated supply voltage |
| External power supply | 80 mA, 12 VDC ±10% (5% ripple max.) |
| Power consumption | 10VA (at 240 VAC) |
| Time ranges（Number of ranges） | 8 |
| Time ranges | 0.01 s to 99.99 s / 0.1 s to 999.9 s / 1 s to 9999 s / 0.1 min to 999.9 min / 0.1 h to 999.9 h / 1 h to 9999 h 1sec～99min59sec |
| Select method | Rotary DIP switch |
| Input signals | Reset, Gate |
| Minimum input signal width | 20 ms(Reset, Gate) |
| Output modes | N F C R K P Q |
| Control output （Contact output） | Type: SPDT Switching capacities (Resistive load): 3 A at 250 VAC/3 A at 24 VDC Minimum applicable load: 10 mA at 5 VDC (failure level: P Reference value) |
| Control output （Solid state output） | Transistor output (NPN open collector) Switching capacities: 100 mA max. 30 VDC max. |
| One-shot output time | 0.1 to 1 s (variable) |
| Reset system | Power reset / External reset / Manual reset / Automatic reset |
| Power reset | Minimum power-opening time: 0.5 s |
| Timer mode | Elapsed time (UP) and remaining time (DOWN) (selectable) |
| Display method | 7-segment LED |
| Digit | 4 digit |
| Character height | 10 mm (Red) |
| Ambient temperature | Operating: -10 to 55 ℃ Storag: -25 to 65 ℃ |
| Ambient humidity | Operating: 35 to 85%RH |
| Total accuracy | Accuracy of operating time setting error temperature influences and voltage influences (including the rise time of the power source and the operating times of the internal and output circuits). Power-ON start: ±0.01% ±50 ms max. The values are based on the set value. Accuracy of operating time setting error temperature influences and voltage influences (including the rise time of the power source and the operating times of the internal and output circuits). Reset start: ±0.005% ±30 ms max. The values are based on the set value. |
| Insulation resistance | 100 MΩ min. (at 500 VDC) Between current carrying terminals and exposed non-current carrying metal parts / Between non-continuous contacts |
| Dielectric strength | Between current carrying terminals and exposed non-current carrying metal parts: 2000 Between non-continuous contacts: 750 |
| Impulse withstand voltage | Between operating power supply terminals: 6 kV Between current carrying terminals and exposed non-current carrying metal parts: 6 kV |
| Noise immunity | Between operating power supply terminals: ±2 kV Between input terminals: ±500 V Square-wave noise by noise simulator |
| Static immunity | Mulfunction: 8 kV |
| Vibration resistance （Destruction） | 10 to 55 Hz, 0.375-mm single amplitude each in 3 directions for 2 h |
| Vibration resistance （Malfunction） | 10 to 55 Hz, 0.25-mm single amplitude each in 3 directions for 10 min |
| Shock resistance （Destruction） | 300 m/s**2, 3 times each in 6 directions |
| Shock resistance （Malfunction） | 100 m/s**2, 4 times each in 6 directions |
| Mechanical life | 10,000,000 operations min. |
| Electrical life | 100,000 operations min. (3 A at 250 VAC resistive load) |
| Mounting method | Flush mounting |
| External connection method | Screw terminal |
| Case color | Light gray (Munsell 5Y7/1) |
| Attachment | Mounting bracket |
| Accessory (sold separately) | Y92H-5: Mounting bracket |
| Weight | 約360g |