E3T-SL11 2M
Type: E3T-SL11 2M
Shape
Square type
Sensing method
Limited Reflective
Sensing distance
5 mm to 15 mm (White paper 50 x 50 mm)
Minimum sensing object
0.15 mm dia. (at sensing distance 10 mm)
Differential distance
2 mm max.
Light source
Red LED (Emission wave length: 650 nm)
Power supply voltage
12 to 24 VDC ±10% (ripple (p-p) 10% max.)
Current consumption
20 mA max.
Control output
NPN open collector output
26.4 VDC max.
Load current: 50 mA max.
Residual voltage: 1 V max. (Load current Less than 10mA)/Residual voltage: 2 V max. (Load current 10 to 50 mA)
Operation mode
Light-ON
Protective circuit
Output short-cut protection
Output reverse polarity protection
Power supply reverse polarity protection
Mutual interference prevention
Response time
1 ms max. (Operate or reset)
Ambient illuminance
Incandescent lamp: 5000 lux max., Sunlight: 10000 lux max.
Ambient temperature (Operating)
-25 to 55 ℃
(with no icing or condensation)
Ambient temperature (Storage)
-40 to 70 ℃
(with no icing or condensation)
Ambient humidity
Operating: 35 to 85%
Storage: 35 to 95%
(with no icing or condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength
1000 VAC at 50/60 Hz for 1 min
Vibration resistance
10 to 2000 Hz, 1.5-mm or 300 m/s**2 double amplitude for 0.5 hours each in X, Y, and Z directions
Shock resistance
1000 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection
IEC: IP67
Connection method
Pre-wired models (Cable length: 2 m)
Indicator
Operation indicator (orange), Stability indicator (green)
Weight (packed state)
Approx. 20 g
Material
Case: PBT
Lens: Denatured Polyarylate
Display: Denatured Polyarylate
Accessories
Instruction manual, Set screws for mounting (M2*14), Nuts
| Shape | Square type |
|---|---|
| Sensing method | Limited Reflective |
| Sensing distance | 5 mm to 15 mm (White paper 50 x 50 mm) |
| Minimum sensing object | 0.15 mm dia. (at sensing distance 10 mm) |
| Differential distance | 2 mm max. |
| Light source | Red LED (Emission wave length: 650 nm) |
| Power supply voltage | 12 to 24 VDC ±10% (ripple (p-p) 10% max.) |
| Current consumption | 20 mA max. |
| Control output | NPN open collector output 26.4 VDC max. Load current: 50 mA max. Residual voltage: 1 V max. (Load current Less than 10mA)/Residual voltage: 2 V max. (Load current 10 to 50 mA) |
| Operation mode | Light-ON |
| Protective circuit | Output short-cut protection Output reverse polarity protection Power supply reverse polarity protection Mutual interference prevention |
| Response time | 1 ms max. (Operate or reset) |
| Ambient illuminance | Incandescent lamp: 5000 lux max., Sunlight: 10000 lux max. |
| Ambient temperature (Operating) | -25 to 55 ℃ (with no icing or condensation) |
| Ambient temperature (Storage) | -40 to 70 ℃ (with no icing or condensation) |
| Ambient humidity | Operating: 35 to 85% Storage: 35 to 95% (with no icing or condensation) |
| Insulation resistance | 20 MΩ min. at 500 VDC |
| Dielectric strength | 1000 VAC at 50/60 Hz for 1 min |
| Vibration resistance | 10 to 2000 Hz, 1.5-mm or 300 m/s**2 double amplitude for 0.5 hours each in X, Y, and Z directions |
| Shock resistance | 1000 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC: IP67 |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Indicator | Operation indicator (orange), Stability indicator (green) |
| Weight (packed state) | Approx. 20 g |
| Material | Case: PBT Lens: Denatured Polyarylate Display: Denatured Polyarylate |
| Accessories | Instruction manual, Set screws for mounting (M2*14), Nuts |