E3Z-G62 2M

buiding

Type: E3Z-G62 2M

Shape Grooved type
Sensing distance 25 mm
Standard sensing object Opaque 1.5 mm dia. min.
Light source Infrared LED (Emission wave length: 940 nm)
Power supply voltage 12 to 24 VDC ±10% (ripple (p-p) 10% max.)
Current consumption 40 mA max.
Control output NPN open collector output
26.4 VDC max.
Load current: 100 mA max. 
Residual voltage: 1 V max.
Operation mode Light-ON/Dark-ON selectable
Protective circuit Output short-circuit protection
Power supply reverse polarity protection
Mutual interference prevention
Response time 1 ms max. (Operate or reset)
Ambient illuminance Incandescent lamp: 3000 lux max., Sunlight: 10000 lux max.
Ambient temperature (Operating) -25 to 55 ℃
(with no icing or condensation)
Ambient temperature (Storage) -40 to 70 ℃
(with no icing or condensation)
Ambient humidity Operating: 35 to 85%
Storage: 35 to 95%
(with no icing or condensation)
Insulation resistance 20 MΩ min. at 500 VDC
Dielectric strength 1000 VAC at 50/60 Hz for 1 min
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance 500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection IEC: IP64
Connection method Pre-wired models (Cable length: 2 m)
Weight (packed state) Approx. 65 g
Material Case: ABS
Accessories Instruction manual