E3Z-LR61 2M
Type: E3Z-LR61 2M
Shape
Square type
Sensing method
Retro-reflective with M.S.R. function
Sensing distance
0.2 m to 7 m (When using the E39-R12)
Spot size
5 mm dia. max. (At sensing distance of 3 m)
Standard sensing object
Opaque 75 mm dia. min.
Minimum sensing object
6 mm dia. (at 3 m)
Light source
Red LD (Emission wave length: 655 nm)
Classification of laser
IEC: CLASS 1, FDA: CLASS 1, JIS: CLASS 1
Power supply voltage
12 to 24 VDC ±10% (ripple (p-p) 10% max.)
Current consumption
30 mA max.
Control output
NPN open collector output
26.4 VDC max.
Load current: 100 mA max.
Residual voltage: 1 V max. (Load current Less than 10mA)/Residual voltage: 2 V max. (Load current: 10 to 100 mA)
Operation mode
Light-ON/Dark-ON selectable
Protective circuit
Output short-cut protection
Output reverse polarity protection
Power supply reverse polarity protection
Mutual interference prevention
Response time
1 ms max. (Operate or reset)
Sensitivity setting
Single-turn adjustment
Ambient illuminance
Incandescent lamp: 3000 lux max., Sunlight: 10000 lux max.
Ambient temperature (Operating)
-10 to 55 ℃
(with no icing or condensation)
Ambient temperature (Storage)
-25 to 70 ℃
(with no icing or condensation)
Ambient humidity
Operating: 35 to 85%
Storage: 35 to 95%
(with no icing or condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength
1000 VAC at 50/60 Hz for 1 min
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection
IEC: IP67
Connection method
Pre-wired models (Cable length: 2 m)
Indicator
Operation indicator (orange), Stability indicator (green)
Weight (packed state)
Approx. 65 g
Material
Case: PBT
Lens: Methacrylate resin
Accessories
Instruction manual
| Shape | Square type |
|---|---|
| Sensing method | Retro-reflective with M.S.R. function |
| Sensing distance | 0.2 m to 7 m (When using the E39-R12) |
| Spot size | 5 mm dia. max. (At sensing distance of 3 m) |
| Standard sensing object | Opaque 75 mm dia. min. |
| Minimum sensing object | 6 mm dia. (at 3 m) |
| Light source | Red LD (Emission wave length: 655 nm) |
| Classification of laser | IEC: CLASS 1, FDA: CLASS 1, JIS: CLASS 1 |
| Power supply voltage | 12 to 24 VDC ±10% (ripple (p-p) 10% max.) |
| Current consumption | 30 mA max. |
| Control output | NPN open collector output 26.4 VDC max. Load current: 100 mA max. Residual voltage: 1 V max. (Load current Less than 10mA)/Residual voltage: 2 V max. (Load current: 10 to 100 mA) |
| Operation mode | Light-ON/Dark-ON selectable |
| Protective circuit | Output short-cut protection Output reverse polarity protection Power supply reverse polarity protection Mutual interference prevention |
| Response time | 1 ms max. (Operate or reset) |
| Sensitivity setting | Single-turn adjustment |
| Ambient illuminance | Incandescent lamp: 3000 lux max., Sunlight: 10000 lux max. |
| Ambient temperature (Operating) | -10 to 55 ℃ (with no icing or condensation) |
| Ambient temperature (Storage) | -25 to 70 ℃ (with no icing or condensation) |
| Ambient humidity | Operating: 35 to 85% Storage: 35 to 95% (with no icing or condensation) |
| Insulation resistance | 20 MΩ min. at 500 VDC |
| Dielectric strength | 1000 VAC at 50/60 Hz for 1 min |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 500 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC: IP67 |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Indicator | Operation indicator (orange), Stability indicator (green) |
| Weight (packed state) | Approx. 65 g |
| Material | Case: PBT Lens: Methacrylate resin |
| Accessories | Instruction manual |