Type: E2E-X7D1-N 2M

Detection head size	M18
type	Cylindrical  shield type
Detection distance	7 mm ± 10%
Set distance	0 to 5.6 mm
Hysteretic	10% or less of the detection distance
Detectable object	Magnetic metal (Detection distance of nonmagnetic metal decreases)
Standard detection object	Iron 18 × 18 × 1 mm
Response frequency	0.5 kHz (average value)
Type of power supply	DC 2 wire type
Power-supply voltage	12 to 24 VDC (ripple (pp) 10% or less)
Operating voltage range	10 to 30 VDC
Leak current	0.8 mA or less
Control output (switching capacity)	3 to 100 mA
Control output (residual voltage)	3 V or less (load current 100 mA, when the cord length is 2 m)
Indicator light	Operation indicator light (red), setting indicator light (green)
action mode	No
Protection circuit	Load short circuit protection, surge absorption
Ambient temperature range	At use: -25 to 70 ° C  Storage: -40 to 85 ° C  (with no freezing)
Ambient humidity range	When used: 35 to 95% RH  Storage: 35 to 95% RH  (with no condensation)
Influence of temperature	Change in detection distance within the temperature range of -25 to + 70 ° C is within ± 10%  (based on the detection distance at 23 ° C)
Effect of voltage	Within the range of the rated voltage ± 15%, the change in the detection distance is within ± 1%  (based on the detection distance at the rated power supply voltage)
Insulation resistance	Between charging unit and casing: 50 MΩ or more (DC 500 V mega)
Withstand voltage	Between charging unit and casing: AC 1000 V 50/60 Hz 1 min
Vibration (durability)	10 to 55 Hz Double amplitude 1.5 mm X, Y, Z direction 2 h
Impact (durability)	1000 m / s ** 2 X, Y, Z 10 times in each direction
Protective structure	IEC standard: IP 67  Internal standard: oil resistant
Connection method	Code pullout type  (Cord length: 2 m)
Mass (packing state)	Approximately 130 g
Material	Case: Brass nickel plating  detection surface: Polybutylene terephthalate (PBT)  Tightening nut: Brass nickel plating  Toothed washer Weld: Iron zinc plating
accessories	instruction manual