E2E2-X10MC1 2M
Type: E2E2-X10MC1 2M
Detection head size
M18
type
Cylindrical
non-shielded type
Detection distance
10 mm ± 10%
Set distance
0 to 8 mm
Hysteretic
10% or less of the detection distance
Detectable object
Magnetic metal (Detection distance of nonmagnetic metal decreases)
Standard detection object
Iron 30 × 30 × 1 mm
Response frequency
200 Hz (average value)
Type of power supply
DC 3 wire type
Power-supply voltage
12 to 24 VDC (ripple (pp) 10% or less)
Operating voltage range
10 to 30 VDC
Current consumption
13 mA or less
Control output (output format)
NPN open collector
Control output (switching capacity)
200 mA (DC 30 V or less)
Control output (residual voltage)
2 V or less (load current 200 mA, when the cord length is 2 m)
Indicator light
Operation indicator light (red)
action mode
No
Protection circuit
Load short circuit protection, power reverse connection protection, surge absorption
Ambient temperature range
When used: -40 to 85 ° C
Storage: -40 to 85 ° C
(However, do not freeze)
Ambient humidity range
When used: 35 to 95% RH
Storage: 35 to 95% RH
(with no condensation)
Influence of temperature
Change in detection distance within a temperature range of -25 to + 70 ° C is within ± 10% Change in detection distance within a temperature range of
-40 to + 85 ° C is within ± 15%
(Detection distance at 23 ° C Standard)
Effect of voltage
Within the range of the rated voltage ± 15%, the change in the detection distance is within ± 1%
(based on the detection distance at the rated power supply voltage)
Insulation resistance
Between charging unit and casing: 50 MΩ or more (DC 500 V mega)
Withstand voltage
Between charging unit and casing: AC 1000 V 50/60 Hz 1 min
Vibration (durability)
10 to 55 Hz Double amplitude 1.5 mm X, Y, Z direction 2 h
Impact (durability)
1000 m / s ** 2 X, Y, Z 10 times in each direction
Protective structure
IEC standard: IP 67
Internal standard: oil resistant
Connection method
Code pullout type
(Cord length: 2 m)
Mass (packing state)
Approximately 160 g
Material
Case: Brass
detection surface: Polybutylene terephthalate (PBT)
Tightening nut: Brass nickel plating
Toothed washer: iron galvanizing
accessories
instruction manual
| Detection head size | M18 |
|---|---|
| type | Cylindrical non-shielded type |
| Detection distance | 10 mm ± 10% |
| Set distance | 0 to 8 mm |
| Hysteretic | 10% or less of the detection distance |
| Detectable object | Magnetic metal (Detection distance of nonmagnetic metal decreases) |
| Standard detection object | Iron 30 × 30 × 1 mm |
| Response frequency | 200 Hz (average value) |
| Type of power supply | DC 3 wire type |
| Power-supply voltage | 12 to 24 VDC (ripple (pp) 10% or less) |
| Operating voltage range | 10 to 30 VDC |
| Current consumption | 13 mA or less |
| Control output (output format) | NPN open collector |
| Control output (switching capacity) | 200 mA (DC 30 V or less) |
| Control output (residual voltage) | 2 V or less (load current 200 mA, when the cord length is 2 m) |
| Indicator light | Operation indicator light (red) |
| action mode | No |
| Protection circuit | Load short circuit protection, power reverse connection protection, surge absorption |
| Ambient temperature range | When used: -40 to 85 ° C Storage: -40 to 85 ° C (However, do not freeze) |
| Ambient humidity range | When used: 35 to 95% RH Storage: 35 to 95% RH (with no condensation) |
| Influence of temperature | Change in detection distance within a temperature range of -25 to + 70 ° C is within ± 10% Change in detection distance within a temperature range of -40 to + 85 ° C is within ± 15% (Detection distance at 23 ° C Standard) |
| Effect of voltage | Within the range of the rated voltage ± 15%, the change in the detection distance is within ± 1% (based on the detection distance at the rated power supply voltage) |
| Insulation resistance | Between charging unit and casing: 50 MΩ or more (DC 500 V mega) |
| Withstand voltage | Between charging unit and casing: AC 1000 V 50/60 Hz 1 min |
| Vibration (durability) | 10 to 55 Hz Double amplitude 1.5 mm X, Y, Z direction 2 h |
| Impact (durability) | 1000 m / s ** 2 X, Y, Z 10 times in each direction |
| Protective structure | IEC standard: IP 67 Internal standard: oil resistant |
| Connection method | Code pullout type (Cord length: 2 m) |
| Mass (packing state) | Approximately 160 g |
| Material | Case: Brass detection surface: Polybutylene terephthalate (PBT) Tightening nut: Brass nickel plating Toothed washer: iron galvanizing |
| accessories | instruction manual |