TL-N10MY1
Type: TL-N10MY1
type
Square type
unshielded type
Detection distance
10 mm ± 10%
Set distance
0 to 8 mm
Hysteretic
15% or less of the detection distance
Detectable object
Magnetic metal (Detection distance of nonmagnetic metal decreases)
Standard detection object
Iron 40 × 40 × 1 mm
Response frequency
10 Hz (average value)
Type of power supply
AC 2 wire type
Power-supply voltage
AC 100 to 220 V
Operating voltage range
AC 90 ~ 250V
Control output (switching capacity)
10 to 200 mA
Indicator light
Operation indicator light (red)
action mode
No
Protection circuit
Surge absorption
Ambient temperature range
At use: -25 to 70 ° C
Storage: -25 to 70 ° C
(with no freezing)
Ambient humidity range
When used: 35 to 95% RH
Storage: 35 to 95% RH
(with no condensation)
Influence of temperature
Change in detection distance within the temperature range of -25 to + 70 ° C is within ± 10%
(based on the detection distance at 23 ° C)
Effect of voltage
Within the range of the rated voltage ± 10%, the change in the detection distance is within ± 1%
(based on the detection distance at the rated power supply voltage)
Insulation resistance
Between charging unit and casing: 50 MΩ or more (DC 500 V mega)
Withstand voltage
Between charging unit and casing: AC 2000 V 50/60 Hz 1 min
Vibration (durability)
10 to 55 Hz Double amplitude 1.5 mm X, Y, Z direction 2 h
Impact (durability)
500 m / s ** 2 X, Y, Z 10 times in each direction
Protective structure
IEC standard: IP 67
Internal standard: oil resistant
Connection method
Code pullout type
(Cord length: 5 m)
Material
Case: Heat resistant ABS
detection surface: Heat resistant ABS
accessories
instruction manual
| type | Square type unshielded type |
|---|---|
| Detection distance | 10 mm ± 10% |
| Set distance | 0 to 8 mm |
| Hysteretic | 15% or less of the detection distance |
| Detectable object | Magnetic metal (Detection distance of nonmagnetic metal decreases) |
| Standard detection object | Iron 40 × 40 × 1 mm |
| Response frequency | 10 Hz (average value) |
| Type of power supply | AC 2 wire type |
| Power-supply voltage | AC 100 to 220 V |
| Operating voltage range | AC 90 ~ 250V |
| Control output (switching capacity) | 10 to 200 mA |
| Indicator light | Operation indicator light (red) |
| action mode | No |
| Protection circuit | Surge absorption |
| Ambient temperature range | At use: -25 to 70 ° C Storage: -25 to 70 ° C (with no freezing) |
| Ambient humidity range | When used: 35 to 95% RH Storage: 35 to 95% RH (with no condensation) |
| Influence of temperature | Change in detection distance within the temperature range of -25 to + 70 ° C is within ± 10% (based on the detection distance at 23 ° C) |
| Effect of voltage | Within the range of the rated voltage ± 10%, the change in the detection distance is within ± 1% (based on the detection distance at the rated power supply voltage) |
| Insulation resistance | Between charging unit and casing: 50 MΩ or more (DC 500 V mega) |
| Withstand voltage | Between charging unit and casing: AC 2000 V 50/60 Hz 1 min |
| Vibration (durability) | 10 to 55 Hz Double amplitude 1.5 mm X, Y, Z direction 2 h |
| Impact (durability) | 500 m / s ** 2 X, Y, Z 10 times in each direction |
| Protective structure | IEC standard: IP 67 Internal standard: oil resistant |
| Connection method | Code pullout type (Cord length: 5 m) |
| Material | Case: Heat resistant ABS detection surface: Heat resistant ABS |
| accessories | instruction manual |