E2EM-X15C2-M1
Type: E2EM-X15C2-M1
Sensing head size
M30
Type
Cylinder type
Shielded
Sensing distance
15 mm ±10%
Setting distance
0 to 12 mm
Differential distance
10% max. of sensing distance
Sensing object
Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object
Iron 30 x 30 x 1 mm
Response frequency
0.1 kHz (Average value)
Power source
DC Three-wires models
Power supply voltage
12 to 24 VDC (ripple(p-p) 10% max.)
Operating voltage range
10 to 30 VDC
Current consumption
13 mA max.
Control output (Output type)
NPN open collector
Control output (Switching capacity)
200 mA
Indicator
Operation indicator (yellow)
Operation mode
NC
Protective circuit
Output short-cut protection, Power supply reverse polarity protection, Surge suppressor
Ambient temperature
Operating: -25 to 70 ℃
Storage: -40 to 85 ℃
(no icing)
Ambient humidity
Operating: 35 to 95% RH
Storage: 35 to 95% RH
(no condensation)
Temperature influence
±15% max. of sensing distance in temperature range of -25 to +70 ℃
(As the basis for sensing distance of 23 ℃)
Voltage influence
±1% max. of sensing distance in rated voltage range ±15%.
(As the basis for sensing distance at standard power voltage)
Insulation resistance
Between charged parts and the case: 50 MΩ min. at 500 VDC
Dielectric strength
Between charged parts and the case: 1,000 VAC 50/60 Hz for 1 min
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance
1000 m/s**2 for 10 times each in X, Y, and Z directions
Degree of protection
IEC: IP67
Connection method
M12 connector models
Weight (Packed state)
approx. 90 g
Material
Case: Brass nickel plating
Sensing surface: Polybutylene terephthalate (PBT)
Clamping nuts: Brass nickel plating
Toothed washer: Iron zinc plating
Accessories
Instruction manual
| Sensing head size | M30 |
|---|---|
| Type | Cylinder type Shielded |
| Sensing distance | 15 mm ±10% |
| Setting distance | 0 to 12 mm |
| Differential distance | 10% max. of sensing distance |
| Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
| Standard sensing object | Iron 30 x 30 x 1 mm |
| Response frequency | 0.1 kHz (Average value) |
| Power source | DC Three-wires models |
| Power supply voltage | 12 to 24 VDC (ripple(p-p) 10% max.) |
| Operating voltage range | 10 to 30 VDC |
| Current consumption | 13 mA max. |
| Control output (Output type) | NPN open collector |
| Control output (Switching capacity) | 200 mA |
| Indicator | Operation indicator (yellow) |
| Operation mode | NC |
| Protective circuit | Output short-cut protection, Power supply reverse polarity protection, Surge suppressor |
| Ambient temperature | Operating: -25 to 70 ℃ Storage: -40 to 85 ℃ (no icing) |
| Ambient humidity | Operating: 35 to 95% RH Storage: 35 to 95% RH (no condensation) |
| Temperature influence | ±15% max. of sensing distance in temperature range of -25 to +70 ℃ (As the basis for sensing distance of 23 ℃) |
| Voltage influence | ±1% max. of sensing distance in rated voltage range ±15%. (As the basis for sensing distance at standard power voltage) |
| Insulation resistance | Between charged parts and the case: 50 MΩ min. at 500 VDC |
| Dielectric strength | Between charged parts and the case: 1,000 VAC 50/60 Hz for 1 min |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h |
| Shock resistance | 1000 m/s**2 for 10 times each in X, Y, and Z directions |
| Degree of protection | IEC: IP67 |
| Connection method | M12 connector models |
| Weight (Packed state) | approx. 90 g |
| Material | Case: Brass nickel plating Sensing surface: Polybutylene terephthalate (PBT) Clamping nuts: Brass nickel plating Toothed washer: Iron zinc plating |
| Accessories | Instruction manual |