Type: E2K-C25ME1 2M

Sensing head size	34 dia.
Type	Cylinder type Capacitive type Unshielded
Sensing distance	25 mm
Setting distance	3 to 25 mm
Differential distance	15% max. of sensing distance (when adjusted to 25 mm ±10% with standard object)
Sensing object	Conductor and dielectrics
Standard sensing object	With grounded metal 50 x 50 x 1 mm
Response frequency	70 Hz (Average value)
Power source	DC Three-wires models
Power supply voltage	12 to 24 VDC (ripple(p-p) 10% max.)
Operating voltage range	10 to 30 VDC
Current consumption	10 mA max. (at 12 VDC) /16 mA max. (at 24 VDC)
Control output (Output type)	NPN
Control output (Switching capacity)	200 mA
Control output (Residual voltage)	2 V (Load current 200 mA with cable length of 2 m)
Indicator	Detection indicator (red)
Operation mode	NO
Protective circuit	Reverse polarity protection, Surge suppressor
Ambient temperature	Operating: -25 to 70 ℃ Storage: -25 to 70 ℃ (no icing)
Ambient humidity	Operating: 35 to 95% RH Storage: 35 to 95% RH (no condensation)
Temperature influence	±15% max. of sensing distance in temperature range of -10 to +55 ℃ ±25% max. of sensing distance in temperature range of -25 to +70 ℃ (As the basis for sensing distance of 23 ℃)
Voltage influence	±2% max. of sensing distance in rated voltage range ±15%. (As the basis for sensing distance at standard power voltage)
Insulation resistance	Between charged parts and the case: 50 MΩ min. at 500 VDC
Dielectric strength	Between charged parts and the case: 1,000 VAC 50/60 Hz for 1 min
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance	500 m/s**2 for 10 times each in X, Y, and Z directions
Degree of protection	IEC: IP66
Connection method	Pre-wired models (Cable length: 2 m)
Weight (Packed state)	approx. 200 g
Material	Case: Heat-resistant ABS resin Sensing surface: Heat-resistant ABS resin
Accessories	Instruction manual, Mounting bracket, M4 Screw