TL-W3MC2
Type: TL-W3MC2
ype
Square type
Unshielded
Sensing distance
3 mm ±10%
Setting distance
0 to 2.4 mm
Differential distance
10% max. of sensing distance
Sensing object
Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object
Iron 12 x 12 x 1 mm
Response frequency
600 Hz (Average value)
Power source
DC Three-wires models
Power supply voltage
12 to 24 VDC (ripple(p-p) 10% max.)
Operating voltage range
10 to 30 VDC
Current consumption
15 mA max. (at 24 VDC)
Control output (Output type)
NPN open collector
Control output (Switching capacity)
100 mA (30 VDC max.)
Control output (Residual voltage)
1 V (Load current 100 mA with cable length of 2 m)
Indicator
Detection indicator (red)
Operation mode
NC
Protective circuit
Reverse polarity protection, Surge suppressor
Ambient temperature
Operating: -25 to 70 ℃
Storage: -25 to 70 ℃
(no icing)
Ambient humidity
Operating: 35 to 95% RH
Storage: 35 to 95% RH
(no condensation)
Temperature influence
±10% max. of sensing distance in temperature range of -25 to +70 ℃
(As the basis for sensing distance of 23 ℃)
Voltage influence
±2.5% max. of sensing distance in rated voltage range ±10%.
(As the basis for sensing distance at standard power voltage)
Insulation resistance
Between charged parts and the case: 50 MΩ min. at 500 VDC
Dielectric strength
Between charged parts and the case: 1,000 VAC 50/60 Hz for 1 min
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance
500 m/s**2, 3 times each in X, Y, and Z directions
Degree of protection
IEC: IP67
Company standard: Oil-proof
Connection method
Pre-wired models
(Cable length: 2 m)
Weight (Packed state)
approx. 70 g
Material
Case: Heat-resistant ABS resin
Sensing surface: Heat-resistant ABS resin
Accessories
Instruction manual, Mounting bracket
| ype | Square type Unshielded |
|---|---|
| Sensing distance | 3 mm ±10% |
| Setting distance | 0 to 2.4 mm |
| Differential distance | 10% max. of sensing distance |
| Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
| Standard sensing object | Iron 12 x 12 x 1 mm |
| Response frequency | 600 Hz (Average value) |
| Power source | DC Three-wires models |
| Power supply voltage | 12 to 24 VDC (ripple(p-p) 10% max.) |
| Operating voltage range | 10 to 30 VDC |
| Current consumption | 15 mA max. (at 24 VDC) |
| Control output (Output type) | NPN open collector |
| Control output (Switching capacity) | 100 mA (30 VDC max.) |
| Control output (Residual voltage) | 1 V (Load current 100 mA with cable length of 2 m) |
| Indicator | Detection indicator (red) |
| Operation mode | NC |
| Protective circuit | Reverse polarity protection, Surge suppressor |
| Ambient temperature | Operating: -25 to 70 ℃ Storage: -25 to 70 ℃ (no icing) |
| Ambient humidity | Operating: 35 to 95% RH Storage: 35 to 95% RH (no condensation) |
| Temperature influence | ±10% max. of sensing distance in temperature range of -25 to +70 ℃ (As the basis for sensing distance of 23 ℃) |
| Voltage influence | ±2.5% max. of sensing distance in rated voltage range ±10%. (As the basis for sensing distance at standard power voltage) |
| Insulation resistance | Between charged parts and the case: 50 MΩ min. at 500 VDC |
| Dielectric strength | Between charged parts and the case: 1,000 VAC 50/60 Hz for 1 min |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h |
| Shock resistance | 500 m/s**2, 3 times each in X, Y, and Z directions |
| Degree of protection | IEC: IP67 Company standard: Oil-proof |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Weight (Packed state) | approx. 70 g |
| Material | Case: Heat-resistant ABS resin Sensing surface: Heat-resistant ABS resin |
| Accessories | Instruction manual, Mounting bracket |