Type: TL-N12MD1 5M

Type	Square type Unshielded
Sensing distance	12 mm ±10%
Setting distance	0 to 9.6 mm
Differential distance	10% max. of sensing distance
Sensing object	Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object	Iron 40 x 40 x 1 mm
Response frequency	500 Hz (Average value)
Power source	DC 2-wire models
Power supply voltage	12 to 24 VDC (ripple(p-p) 10% max.)
Operating voltage range	10 to 30 VDC
Leakage current	0.8 mA
Control output (Switching capacity)	3 to 100 mA
Indicator	Operation indicator (red), Operation setting indicator (green)
Operation mode	NO
Protective circuit	Output short-cut protection, Surge suppressor
Ambient temperature	Operating: -25 to 70 ℃ Storage: -25 to 70 ℃ (no icing)
Ambient humidity	Operating: 35 to 95% RH Storage: 35 to 95% RH (no condensation)
Temperature influence	±10% max. of sensing distance in temperature range of -25 to +70 ℃ (As the basis for sensing distance of 23 ℃)
Voltage influence	±2.5% max. of sensing distance in rated voltage range ±15%. (As the basis for sensing distance at standard power voltage)
Insulation resistance	Between charged parts and the case: 50 MΩ min. at 500 VDC
Dielectric strength	Between charged parts and the case: 1,000 VAC 50/60 Hz for 1 min
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance	1000 m/s**2 for 10 times each in X, Y, and Z directions
Degree of protection	IEC: IP67 Company standard: Oil-proof
Connection method	Pre-wired models (Cable length: 5 m)
Material	Case: Heat-resistant ABS resin Sensing surface: Heat-resistant ABS resin
Accessories	Instruction manual, Mounting bracket, Mounting screw