NA1-11-PN | Small / Slim Object Detection Area Sensor NA1-11

buiding

Spec Detail

Item Specifications
Product Number NA1-11-PN
Part Number NA1-11-PN
CE marking directive compliance EMC Directive, RoHS Directive
Sensing height 100 mm 3.937 in
Sensing range 0.17 to 1 m 0.558 to 3.281 ft
(Note:The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.)
Element pitch 10 mm 0.394 in
Number of emitting / receiving elements 11 Nos. each on the emitter and the receiver, respectively
Sensing object ø13.5 mm ø0.531 in or more opaque object
(Note:Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.)
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption Emitter: 80 mA or less
Receiver: 100 mA or less
Output PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Output:Utilization category DC-12 or DC-13
Output:Output operation ON or OFF when beam channel is interrupted, selectable by operation mode switch
Output:Short-circuit protection Incorporated
Response time In Dark state: 5 ms or less
In Light state: 10 ms or less
Indicators:Emitter Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch)
Indicators:Receiver Operation indicator: Orange LED (lights up when the output is ON)
Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch)
Pollution degree 3 (Industrial environment)
Protection IP62 (IEC)
Ambient temperature -10 to 55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 150 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 880nm 0.035mil, cross-beam scanning system)
Material Enclosure: Heat-resistant ABS
Lens: Acrylic
Indicator cover: Acrylic
Cable 0.3 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable.
Weight Net weight: Emitter 80 g approx., Receiver 85 g approx
Gross Weight: 210 g approx.