NA40-20 | 40 mm Beam Pitch General Purpose Area Sensor NA40

 

buiding

Spec Detail

Item Specifications
Product Number NA40-20
Part Number NA40-20
Sensing height 760 mm 29.921 in
Sensing range 5 m 16.404 ft
Beam pitch 40 mm 1.575 in
Sensing object dia. 60 mm dia. 2.362 in or more opaque object (Completely beam interrupted object)
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption Emitter: 35 mA or less
Receiver: 115 mA or less
Sensing output NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between sensing output and 0 V)
- Residual voltage: 1.6 V or less (at 100 mA sink current)
Sensing output:Output operation ON when all beam channels are received / OFF when one or more beam channels are interrupted
Self-diagnosis output NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V)
- Residual voltage: 1.6 V or less (at 50 mA sink current)
Self-diagnosis output:Output operation OFF when unstable light received condition continues for 5 sec. or more, or the output transistor fails
Response time 12 ms or less
Interference prevention function Incorporated (Two units of sensors can be mounted close together.)
Protection IP65 (IEC)
Ambient temperature -10 to +50 degrees +14 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit
Emitting element Infrared LED (synchronized scanning system)
Material Protection enclosure: Aluminum
Unit case: ABS
Front cover: Acrylic
Lens: Acrylic
Weight(Total weight of emitter and receiver) 1,400 g approx.
Dummy MS-NA40-1 (Sensor mounting bracket): 1 set for emitter and receiver
Adjusting screwdriver: 1 pc.