Panasonic AFP7Y16T | FP7 Input and Output units

Spec Detail

Item	Specifications
Product Number	AFP7Y16T
Part Number	AFP7Y16T

Item	Specifications
Insulation method	Photocoupler insulation
Rated control capacity	-
Min. load	-
Output type	Open collector
Rated load voltage	5 to 24 V DC
Load voltage allowable range	4.75 to 26.4 V DC
Max. load current:0.3 A (Y0 to Y7)	1 A
Max. load current:0.1 A (other than that above)	1 A
Common restriction	5 A
Max. surge current	3 A
OFF state leakage current	1 micro A or less
ON state maximum voltage drop	0.5 V or less
Repose time:OFF→ON	0.05 ms or less (at load current 0.5 mA or more)
Repose time:ON→OFF	0.3 ms or less (at load current 0.5 mA or more)
Life time:Mechanical life	-
Life time:Electrical life	-
External power supply:Voltage	4.75 to 26.4 V DC
External power supply:Current (at 24 V)	70 mA
Surge absorber	Zener diode
Relay socket	-
Short circuit protection	-
Output points per common	16 points/common
Operating mode indicator	16 points LED display (lights when ON)
External connection method	Terminal block (M3 screw)

Item	Specifications
Ambient temperature	0 to +55 degrees +32 to +131 degrees Fahrenheit , at storage: -40 to +70 degrees -40 to +158 degrees Fahrenheit
Ambient humidity	10 to 95 % RH (at 25 degrees 77 degrees Fahrenheit , no condensation), at storage: 10 to 95 % RH (at 25 degrees 77 degrees Fahrenheit , no condensation)
Breakdown voltage	500 V AC for 1 minute (Note) The breakdown voltage is 2,300 V AC, 1 minute.
Insulation resistance	100 MOhm or more (at 500 V DC)
Vibration resistance	5 to 8.4 Hz, single amplitude of 3.5 mm 0.14 in, 1 sweep/min. (IEC61131-2); 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC61131-2); for 10 min. each in X, Y, and Z directions
Shock resistance	147 m/s2 or more, 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating condition	Free from corrosive gasses and excessive dust