Panasonic EX-F1-C5 | Pipe-mountable Liquid Level Detection Sensor EX-F1
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | EX-F1-C5 |
| Part Number | EX-F1-C5 |
| CE marking directive compliance | EMC Directive, RoHS Directive |
| Sensing object | Liquid (Note):Unclear or highly viscous liquid may not be detected stably. |
| Applicable pipe diameter | Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe [PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ] (Note：Do not use the sensor with pipes other than the above specified.) |
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Current consumption | 30 mA or less (Note：Unclear or highly viscous liquid may not be detected stably.) |
| Output | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Output:Output operation | Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON) |
| Output:Short-circuit protection | Incorporated |
| Response time | 2 ms or less |
| Operation indicator | Red LED (lights up when the output is ON) |
| Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ (Note：Liquid being detected should also be kept within the rated ambient temperature range.) |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient illuminance | lncandescent light: 3,000 lx or less at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
| Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each |
| Emitting element | Infrared LED (modulated) |
| Material | Enclosure: Polycarbonate, Tying band: Nylon, Anti-slip tube: Silicone |
| Accessory | Tying band: 2 pcs., Anti-slip tube: 2 pcs. |