Panasonic HG-S1010 | Contact-Type Digital Displacement Sensor HG-S
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | HG-S1010 |
| Part Number | HG-S1010 |
| Applicable controller | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113 |
| Position detection method | Optical absolute linear encoder method |
| Measuring range | 10 mm 0.394 in |
| Stroke | 10.5 mm 0.413 in or more |
| Measuring force : Downward mount | 1.65 N or less 1.10 N (Note 1): Measured at an ambient temperature of +20 ℃ +68 ℉. (Note 2): Typical value near center of measurement. |
| Measuring force : Upward mount | 1.35 N or less 0.85 N (Note 1): Measured at an ambient temperature of +20 ℃ +68 ℉. (Note 2): Typical value near center of measurement. |
| Measuring force : Side mount | 1.50 N or less 0.95 N (Note 1): Measured at an ambient temperature of +20 ℃ +68 ℉. (Note 2): Typical value near center of measurement. |
| Resolution | 0.5 μm 0.020 mil |
| Indication accuracy(P-P) | Full range: 2.0 μm 0.079 mil or less Narrow range: 1.0 μm 0.039 mil or less (any 60 μm 2.362 mil) (Note): Measured at an ambient temperature of +20 ℃ +68 ℉. |
| Tip deviation amount | 35 μm 1.378 mil (typical) |
| Hot swap function | Incorporated |
| Operation indicator | 2-color LED (Orange / Green) |
| Environmental resistance : Protection | IP67 (IEC) (Note): Excludes damage and deterioration to rubber bellows due to external causes. |
| Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No condensation or icing), Storage: -20 to +60 ℃ -4 to +140 ℉ |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Insulation resistance | 100 MΩ or more at 250 V DC |
| Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each |
| Shock resistance | 1,960 m/s2acceleration in X, Y and Z directions three times each |
| Mechanical life | 100 million times or more (Note): Typical value in a clean environment with no contact with dust or liquids such as water and oil. |
| Tightening torque | Setscrew: 1.5 N・m, Nut: 12.5 N・m |
| Probe tightening torque | 0.1 to 0.4 N・m (no force applied to main unit) |
| Grounding method | Capacitor grounding |
| Material | Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe(Note): Ceramic, Rubber bellows: NBR (black) (Note): The probes (optional) are also available. |
| Weight | Net weight: 80 g approx. |
| Accessory | Standard type (HG-S1010 / HG-S1110): Sensor head fastening wrench 1 pc., Mounting nut 1 pc. |