Panasonic EQ-501 | Adjustable Range Reflective Photoelectric Sensor EQ-500

buiding
 

Spec Detail

Item Specifications
Product Number EQ-501
Part Number EQ-501
CE marking directive compliance Low Voltage Directive, EMC Directive, RoHS Directive
Adjustable range 0.2 to 2.5 m
0.656 to 8.202 ft
(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m 0.328 ft, or more, away.
(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
Sensing range(at maximum setting distance) 0.1 to 2.5 m
0.328 to 8.202 ft
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
Hysteresis 10 % or less of operation distance
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
Supply voltage 24-240 V AC ±10 % or 12 to 240 V DC ±10 %
Ripple P-P 10 % or less
Power / Current consumption AC: 4 VA or less
DC: 3 W or less
Output Relay contact 1a
- Switching capacity: 2 50 V AC 3 A (resistive load), 30 V DC 3 A (resistive load)
- Electrical life: 100,000 or more switching operations (switching frequency 1,200 operations/hour)
- Mechanical life: 50 million or more switching operations (switching frequency 18,000 operations/hour)
Output:Output operation Switchable either Detection-ON or Detection-OFF
Output:Short-circuit protection -
Response time 20 ms or less
Operation indicator Orange LED (lights up when the output is ON)
Stability indicator Green LED (lights up under stable operating condition)
Distance adjuster 2-turn mechanical adjuster with indicator
Sensing mode -
Timer function -
Automatic Interference prevention function Incorporated
(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.
Protection IP67 (IEC)
Ambient temperature –20 to +55 ℃ –4 to +131 ℉ (No dew condensation or icing allowed),
Storage: –30 to +70 ℃ –22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 Lx or less at the light-receiving face
Voltage withstandability 2,000 V AC for one min. among supply terminals, non-supply metal parts and relay contact output terminals, 1,000 V AC for one min. between relay contacts
Insulation resistance 100 MOhm , or more, with 500 V DC megger among supply terminals, non-supply metal parts and relay contact output terminals as well as between relay contacts
Vibration resistance 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, modulated)
Receiving element 2-segment photodiode
Material Enclosure: ABS
Front cover: Polycarbonate
Display cover: Polycarbonate
Connection method Screw-on terminal connection
Cable Suitable for round cable φ9 to φ11 mm φ0.354 to φ0.433 in
Cable length Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cabtyre cable.
Weight Net weight: 100 g approx.
Accessory Adjusting screwdriver: 1 pc.

 

 

 

1

2

3

4

5

6