Panasonic EX-24B-PN | Ultra-compact Photoelectric Sensor EX-20 Ver.2

buiding
 

Spec Detail

Item Specifications
Product Number EX-24B-PN
Part Number EX-24B-PN
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 2 to 25 mm 0.079 to 0.984 in (Conv. point: 10 mm 0.394 in) with white non-glossy paper (50 x 50 mm) (1.969 x 1.969 in)
Sensing object Min. dia. 0.1 mm dia. 0.004 in copper wire (Setting distance: 10 mm 0.394 in)
Hysteresis 15 % or less of operation distance [50 x 50 mm 1.969 x 1.969 in with white non-glossy paper]
Repeatability(perpendicular to sensing axis) 0.1 mm 0.004 in or less (Setting distance: 10 mm 0.394 in)
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption 13 mA or less
Output PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)
Output:Utilization category DC-12 or DC-13
Output:Short-circuit protection Incorporated
Response time 0.5 ms or less
Operation indicator Orange LED (lights up when the output is ON)
Stability indicator Green LED (lights up under stable light received condition or stable dark condition)
Sensitivity adjuster -
Operation mode switch -
Protection IP67 (IEC)
Ambient temperature -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element Red LED (modulated)
Emitting element:Peak emission wavelength 680 nm 0.027 mil
Material Enclosure: Polyethylene terephthalate
Lens: Polyalylate
Cable 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
Weight Net weight: 20 g approx
Gross weight: 45 g approx
Accessory -

 

 

1

2

3

4

5

6