Panasonic NX5-M30B | Compact Multi-voltage Photoelectric Sensor NX5

buiding
 

Spec Detail

Item Specifications
Product Number NX5-M30B
Part Number NX5-M30B
CE marking directive compliance Low Voltage Directive, EMC Directive, RoHS Directive
Sensing range 30 m 98.425 ft
Sensing object dia. 20 mm dia. 0.787 in or more opaque object (Completely beam interrupted object)
(Note) If slit masks (optional) are fitted, an object as small as 3 x 6 mm 0.118 x 0.236 in can be detected.
Hysteresis -
Repeatability(perpendicular to sensing axis) 0.2 mm 0.008 in or less
Supply voltage 24 to 240 V AC +10-15 % or 12 to 240 V DC +10-15 % Ripple P-P 10 % or less
Power consumption Emitter: 1.5 VA or less
Receiver: 2 VA or less
Output Relay contact 1 c
- Switching capacity: 250 V AC 1 A (resistive load), 30 V DC 2 A (resistive load)
- Electrical life: 500,000 or more switching operations (switching frequency 3,600 operations/hour), 100,000 or more switching operations (switching frequency 3,600 operations/hour)
- Mechanical life: 100 million or more switching operations (switching frequency 36,000 operations/hour)
Output:Output operation Dark-ON
Response time 10 ms or less
Operation indicator Red LED (lights up when the output is ON)
Stability indicator Green LED (lights up under stable light received condition or stable dark condition)
Power indicator Red LED (lights up when the power is ON)
Sensitivity adjuster -
Automatic Interference prevention function -
Pollution degree 3 (Industrial environment)
Protection IP66 (IEC)
Ambient temperature -20 to +55 degrees -4 to +131 degrees Fahrenheit (No dew condensation or icing allowed) (Note) , Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
(Note) In case the sensor is to be used at an ambient temperature of -15 degrees +5 degrees Fahrenheit , or less, please contact our office.
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,500 Lx or less at the light-receiving face
Voltage withstandability 1,500 V AC for one min. between power supply and output terminals
1,000 V AC for one min. between relay contact terminals
Insulation resistance 20 MOhm , or more, with 500 V DC megger between power supply and output terminals, and between relay contact terminals
Vibration resistance 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions two hours each
Shock resistance 500 m/s2 (50 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (modulated)
Emitting element:Peak emission wavelength 880 nm 0.035 mil
Material Enclosure: Polycarbonate
Lens: Polycarbonate
Cover: Polycarbonate
Cable 0.3 mm2 5-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver).
Weight Emitter: 125 g approx
Receiver: 140 g approx

 

 

1

2

3

4

5

6