Panasonic PM2-LH10 | Convergent Reflective Micro Photoelectric Sensor PM2

buiding

Spec Detail

Item Specifications
Product Number PM2-LH10
Part Number PM2-LH10
CE marking directives EMC Directive, RoHS Directive
Sensing range 2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) 
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
Minimum sensing object ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)
Hysteresis 20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
Repeatability(perpendicular to sensing axis) 0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
Supply voltage 5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less
Current consumption Average: 25 mA or less, Peak: 80 mA or less
Output NPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Output:Overcurrent protection Incorporated
Output:Utilization category DC-12 or DC-13
Response time 0.8 ms or less
Operation indicator Red LED (lights up when the output is ON)
Pollution degree 3 (Industrial environment)
Ambient temperature –10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), 
Storage: –25 to +80 ℃ –13 to +176 ℉
Ambient humidity 45 to 85 % RH, Storage: 45 to 85 % RH
Ambient illuminance Incandescent light: 3,500 lx or less at the light-receiving face
Vibration resistance 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Material Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)
Cable -
Cable length Total length up to 2 m 6.562 ft is possible with 0.3 mm2, or more, cable.
(If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)
Weight Net weight: 4.5 g approx.
Gross weight: 85 g approx.(10 piece package)
 
 

1

2

3

4

5

6