Panasonic PM2-LL10 | Convergent Reflective Micro Photoelectric Sensor PM2
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | PM2-LL10 |
| Part Number | PM2-LL10 |
| CE marking directives | EMC Directive, RoHS Directive |
| Sensing range | 2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation. |
| Minimum sensing object | ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in) |
| Hysteresis | 20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) |
| Repeatability(perpendicular to sensing axis) | 0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in. |
| Supply voltage | 5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less |
| Current consumption | Average: 25 mA or less, Peak: 80 mA or less |
| Output | NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Output:Overcurrent protection | Incorporated |
| Output:Utilization category | DC-12 or DC-13 |
| Response time | 0.8 ms or less |
| Operation indicator | Red LED (lights up when the output is ON) |
| Pollution degree | 3 (Industrial environment) |
| Ambient temperature | –10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉ |
| Ambient humidity | 45 to 85 % RH, Storage: 45 to 85 % RH |
| Ambient illuminance | Incandescent light: 3,500 lx or less at the light-receiving face |
| Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each |
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| Emitting element | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) |
| Material | Enclosure: Polycarbonate, Terminal part: HSM (Ag plated) |
| Cable | - |
| Cable length | Total length up to 2 m 6.562 ft is possible with 0.3 mm2, or more, cable. (If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.) |
| Weight | Net weight: 4 g approx. Gross weight: 80 g approx.(10 piece package) |