|CE marking directive compliance||EMC Directive, RoHS Directive|
|Type||Non-threaded type For 0.8 mm 0.031 in sensing|
|Sensing range||0 to 0.8 mm 0 to 0.031 in
(Note) The sensing range is specified for the standard sensing object.
|Standard sensing object||Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in|
|Temperature characteristics||0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
|Pollution degree||3 (Industrial environment)|
|Protection||IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)|
|Ambient temperature||-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉|
|Ambient humidity||35 to 85 % RH, Storage: 35 to 85 % RH|
|Voltage withstandability||250 V AC for one min. between all supply terminals connected together and enclosure|
|Insulation resistance||20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure|
|Vibration resistance||10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each|
|Shock resistance||500 m/s2 acceleration (50 G approx.) in X, Y and Z directions five times each|
|Enclosure||Stainless steel (SUS303)|
|Cable||High frequency coaxial cable with connector, 3 m 9.843 ft long
(Note) For the flexible cable type, please contact our office.
|Cable extension||Extension up to total 10 m 32.808 ft is possible with the optional cable.|
|Net Weight||40 g approx.
(Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.